MaxxECU Mini Standard Vadības bloks
Norādītais piegādes termiņš ir informatīvs un noradīts kā aptuvenais piegādes termiņš ja prece ir pieejama piegādātāja noliktavā. Vairāk par piegādes nosacījumiem. Ja vēlaties precizēt piegādes termiņu, lūdzu nosūtiet mums ziņu.
Apmaksājiet savus pirkumus 3 vienādās daļās, 3 mēnešu laikā. Bez procentiem vai komisijas maksas. Vienkārši maksājiet vēlāk! https://trackday.eu/esto-3
uz Omniva vai DPD pakomātu
uz Omniva vai DPD pakomātu
MaxxECU Mini Standard Dzinēja vadības bloks 4 cilindru dzinējiem
Entry level at MaxxECU, this so-called "Mini" version is intended for engines up to 4 cylinders in sequential ignition, or 8 cylinders with wasted spark. It has a 4 bar MAP sensor directly built-in on the waterproof aluminum housing (intake manifold absolute pressure). Thanks to the MTune software, you will be able to build complete ignition and fuel maps along with many features: boost control, traction & launch control, and so on. With its 8 Mb of internal memory and ARM Cortex-M3 processor at 120 MHz, the MaxxECU Mini engine management system is capable of feats: 1000 Hz data logging, ignition resolution of 0.1°, injection resolution of 0.001 ms, and up to 2000 injection and ignition computing per second.
The MaxxECU Mini supports the CAN bus protocol and has 4 high impedance injector outputs, 4 ignition outputs, 4 extra outputs and 4 extra inputs (x2 0-5V analog and x2 digital), guaranteeing maximum possibilities for a minimum price! With a dimension of 85 x 120 x 43 mm, it weighs only 245 g. Do not hesitate to check out all the advanced technical information on the official website of the manufacturer!
Target engines for MaxxECU MINI
All 1-4, 6 and 8 cylinder engines
Up to 4 cylinders fully sequentially (using a digital input as HOME)
Up to 8 cylinders in wasted spark
MaxxECU MINI inputs
Intake air temperature sensor (IAT)
Coolant temperature sensor (CLT)
Throttle position sensor (TPS)
1 trigger input (VR/HALL). Automatic trigger level detection
2 digital inputs used for example for speed sensors (Hall) or switches
2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
MaxxECU MINI outputs
4 injectors outputs. High impedance only
4 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (2A)
MaxxECU MINI technical
CAN bus for expansion modules, OEM vehicle CAN, OBDII
USB communication for tuning with MTune
8MB memory for internal logging, up to 1000Hz
Supply voltage 8-22V
ARM Cortex-M3 120MHz main processor
Resolution on ignition: 0.1 degrees
Resolution on injectors: 0.001 ms
Updates the fuel and ignition calculations 2000 times per second
The fastest PC communication on the market
85x120x43mm excluding protruding connectors
Weight: 245g (ECU only)
Waterproofed aluminium case
| Zīmols | MaxxECU |
|---|