MaxxECU Mini Standard Engine Management Unit
Apmaksājiet savus pirkumus 3 vienādās daļās, 3 mēnešu laikā. Bez procentiem vai komisijas maksas. Vienkārši maksājiet vēlāk! https://trackday.eu/esto-3
to Omniva or DPD parcel locker
to Omniva or DPD parcel locker
MaxxECU Mini Engine Management System Specification
Entry level at MaxxECU, this so-called "Mini" version is intended for engines up to 4 cylinders in sequential ignition, or 8 cylinders with wasted spark. It has a 4 bar MAP sensor directly built-in on the waterproof aluminum housing (intake manifold absolute pressure). Thanks to the MTune software, you will be able to build complete ignition and fuel maps along with many features: boost control, traction & launch control, and so on. With its 8 Mb of internal memory and ARM Cortex-M3 processor at 120 MHz, the MaxxECU Mini engine management system is capable of feats: 1000 Hz data logging, ignition resolution of 0.1°, injection resolution of 0.001 ms, and up to 2000 injection and ignition computing per second.
The MaxxECU Mini supports the CAN bus protocol and has 4 high impedance injector outputs, 4 ignition outputs, 4 extra outputs and 4 extra inputs (x2 0-5V analog and x2 digital), guaranteeing maximum possibilities for a minimum price! With a dimension of 85 x 120 x 43 mm, it weighs only 245 g. Do not hesitate to check out all the advanced technical information on the official website of the manufacturer!
Target engines for MaxxECU MINI
All 1-4, 6 and 8 cylinder engines
Up to 4 cylinders fully sequentially (using a digital input as HOME)
Up to 8 cylinders in wasted spark
MaxxECU MINI inputs
Intake air temperature sensor (IAT)
Coolant temperature sensor (CLT)
Throttle position sensor (TPS)
1 trigger input (VR/HALL). Automatic trigger level detection
2 digital inputs used for example for speed sensors (Hall) or switches
2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
MaxxECU MINI outputs
4 injectors outputs. High impedance only
4 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (2A)
MaxxECU MINI technical
CAN bus for expansion modules, OEM vehicle CAN, OBDII
USB communication for tuning with MTune
8MB memory for internal logging, up to 1000Hz
Supply voltage 8-22V
ARM Cortex-M3 120MHz main processor
Resolution on ignition: 0.1 degrees
Resolution on injectors: 0.001 ms
Updates the fuel and ignition calculations 2000 times per second
The fastest PC communication on the market
85x120x43mm excluding protruding connectors
Weight: 245g (ECU only)
Waterproofed aluminium case
| Manufacturer | MaxxECU |
|---|