Norādītais piegādes termiņš ir informatīvs un noradīts kā aptuvenais piegādes termiņš ja prece ir pieejama piegādātāja noliktavā. Vairāk par piegādes nosacījumiem. Ja vēlaties precizēt piegādes termiņu, lūdzu nosūtiet mums ziņu.
Apmaksājiet savus pirkumus 3 vienādās daļās, 3 mēnešu laikā. Bez procentiem vai komisijas maksas. Vienkārši maksājiet vēlāk! https://trackday.eu/esto-3
uz Omniva vai DPD pakomātu
uz Omniva vai DPD pakomātu
PiggyBack tuning device
MAP 4Bar
For most applications, the DET3 allows for the removal of an airflow meter, can drive up to 4 injectors in batch fire and Ignition timing can be adjusted via 16×16 tables. The parametric output channels can be configured to control boost with the use of a boost control solenoid, nitrous activation, water or methanol injection control, etc. Launch control and map switching are also among the advanced features available to the end user. In “Fuel Implant” mode, the DET3 operates much like a standalone ECU, calculating fuel requirements based on RPM, IAT, CLT, TPS and even O2 feedback.
Features of the device:
- 4 independent 16x16 maps (fuel map, two PWM maps, ignition map),
- 8 correction maps 16x1,
- 2 independent,
- switchable sets of maps,
- possibility of modifying a single analog signal,
- 4 analog inputs,
- built-in DataFlash enabling logging in without a connected laptop
- power supply measurement,
- the ability to modify the signal of the frequency flow meter (17Hz-4kHz),
- ignition signal service using inductive, Hall and optical sensors as well as signals controlling the ignition module. The device supports both single ended and balanced signals (differential),
- support for many types of ignition: 60-2, 36-2, 36-1, Multitooth, Ignition Modules,
- operation of turbocharger supercharger control valve,
- support for 4 high-resistance injectors (work in the "full group" system),
- parametric ON / OFF output,
- automatic conversion from MAP to MAF with the use of a learning algorithm,
- starting procedure, road dyno,
- calibration capability of any analog sensor, so that analog values can be displayed in their real values (eg signal from the MAP of the sensor in bars, signal from the broadband probe as AFR, etc.),
- the possibility of free firmware upgrade as the device develops (eg new modes of ignition, additional functions),
- communication with the device is carried out using the USB connector
- 24 months warranty for the device
| Zīmols | ECUMaster |
|---|